.
ALBATROSS Products
   

1)SUPERKLEEN® VENTA™  CLEANING EQUIPMENT
A family of powerful exhaust equipment designed to eliminate solvent vapors  from the workplace
All the systems Venta Superkleen offer a powerful exhaust motor, to eliminate the solvent vapors. The rapid movement of the air also dries the fabric, thus helping the cleaning process. The cleaning volume (amount of garments) or its productive installation space will indicate which Superkleen Venta  System better matches your requirements. 

SUPERKLEEN VENTA-1 
• Designed to be installed on table surface, it requires minimum space. 
• The sleeve shaped cleaning arm has been designed to clean all kind of clothes. 
• The cleaning gun can be held over the cleaning surface through a holder device of the Albatross gun  (not included). 
• It is a perfect system for embroderies companies, screen printing, and other medium or low use applications. 
•It is sold also together with the cleaning gun Albatross SG-2000. (optional) 

SUPERKLEEN VENTA-2
• The spot cleaning  equipment that it only occupies two square feet of floor space
• Sleeve shaped cleaning arm designed to clean all kind of screen printed clothes. The arm swings to avoid the fluid rebound . 
• Hard, steel frame and strong leg. 
•Useful shelf  to place spot removers or cleaning liquids. Holding bar with the gun holder (included) that reduces the operator fatigue. 
• Perfect for companies with volume printing , clothes manufacturers, repair departments and medium to heavy duty uses. 
It is also sold jointly with the  Albatross VS -.895 cleaning gun(optional)

SUPERKLEEN / KREBS VENTA-8
• The most complete spot cleaning equipment, for use in high volume facilities. 
The two big cleaning surfaces facilitate the spots removal from big pieces and from sleeves and  pants legs. Both surfaces make a forward oriented angle to avoid the fluid rebound.
• The Venta frame  is specially molded inside a strong table, with syeel legs.
• The special holder bracket with balancing spring produces the lightweight sensation
• Perfect for high volume clothes manufacturers as well as other production applications.
• It can be purchased jointly with the SG-5000 direct feed cleaning gun  with a compressed air drying system (optional)

2)ALBATROSS CLEANING GUNS  

The most reliable, versatile and long lasting range in cleaning guns for all type of applications on textile spot

Albatross SG-2000TM is a high quality cleaning gun at a low price. It is perfect for sport t-shirts stores, embroiderers, tailors, curtain manufacturing rooms and other applications of  intermitent use. Among its features, we can mention: 
• Pinpoint spray jet.
• Solid lightweight design.
• Variable spray nozzle. • 25 watts Engine. • Bronze pump tank. • Adjustable flow amount • Great capacity. Large canister. 

Albatross VS-895TM is an excellent combination. It is ideal for apparel manufacturers, textile screen printers and other medium volume applications. 

Among its characteristics are included: 
• A powerful engine with silicon diode, 16 oz wide opening tank , variable spray nuzzle, 40 watts engine, made in  Switzerland with high quality, adjustable flow rate, vapor lock switch. 

Albatross SG~5000TM is the most powerful cleaning gun ever built. It is perfect for high stamping volume companies,  textile mills, apparel manufacturers, dry cleaners and  other heavy duty applications. 

Some of its features include: 
• Extremely high pressure, vapor lock switch, made in Switzerland with high quality, variable spray nozzle. 
•Extracts the fluid from a big bottle of 22 oz or directly from the container, 60 watts engine. 
• Unbreakable Plastic Frame
• The conjunction of pump, stainless steel and bronze, prepared for a long lasting use without any trouble. 

ALBATROSS ACCESSORIES 

Albatross Gun Holder  

It holds the gun over the surface to be cleaned for safer use and to make a faster operation. It has a solid steel frame and a balancing spring for hard work that ensures an everlasting performance without problems. Use it with all Albatross guns



Albatross Air Drying Device

It allows you to clean and dry at the same time. The quick dry eliminates the undesired rings and facilitates an immediate inspection. The complete device includes the air hose. (a compressor is required) Use it with VS-895 and  SG-5000. 



Albatross direct feed extension  

Extracts the fluid directly from the bulk containers, this saves time, reduces weight and avoids spills. One filter and one special valve make it possible that only the cleaning fluid enters the gun. Use it only with SG-5000.

ALBATROSS SCREEN BLASTE

 
POWERFUL HIGH PRESSURE CLEANERS FOR SCREEN CLEANING AND RECLAIMING

Albatross Screen Blasters cleaners provide pressure, performance, and reliability necessary for reclaiming and cleaning of screens, with years of frequent use. The modern compact design of Screen Blasters makes them suitable to use in cleaning stores or in a portable way for exterior cleaning. High pressure spraying reduces or eliminates the need for using cleaning and recovery liquids, and it greatly reduces the cleaning time. Its special injectors are designed  to remove emulsions, pattern and to cut films. 

Albatross Screen Blasters are also very helpful in degreasing wefts, ink washing and rings elimination. 

Albatross Screen Blaster MB-1500   
Powered by 1400 P.S.I. through a long lasting brass pump head. The injector of model MB-1500 is totally adjustable, allowing a narrow and precise jet as well as a wide spraying fan type (mist). The sprayer gun and stain trigger are ergonomically designed facilitating the precise weft cleaning. The safety valve for flow excess protects the machine against excessive pressure. 

Albatross Screen Blaster MB-2000   
It provides the same cleaning power at 40% higher flow speed. Furthermore, the operation pressure of  model MB-2000 is totally adjustable, from 5 to 105 bar.MB-2000 is equipped with a trigger extension which allows the user to be standing further away from the weft during the cleaning process. The three ways injector of  model MB-2000 can be adapted allowing a narrow precise jet as well as  a wide spraying fan type , or a jet of chemical product (where cleaning liquids are automatically mixed into water). 

Both  Screen Blaster  Albatross models have been manufactured according to the most modern rules. Both models are suitable to be used with the Albatross Master Tank and the  Water Filtration System WTS. 

SPECIFICATIONS 

MB-1500 

MB-2000 

Water volume 

1.6 GPM 

2.4 GPM 

Pump Material
Brass
Brass
Electrical requirements 

1lOV, 6OHz, 

1lOV, 6OHz, 

Fusibles Protection 

16 Amp. 

16 Amp. 

Maximum Temp. of water 

60 º C 

60 º C 

Injector type 

ADJUSTABLE 

3 WAYS ADJUSTABLE
Trigger extension

NO 

YES 

Manufacturing country 

GERMANY 

GERMANY 

3)S.P.I.F. CURED INK REMOVERS

Superkleen® S.P.I.F. and S.P.I.F. II are exclusive solvent mixtures developed to remove spots of cured ink spots from all kinds of printed fabrics.

Introduction
During the screen printing process, the spots originated by fingerprints or the marks on the fabrics can become an expensive problem. The S.P.I.F ink removers, applied with the Albatross cleaning gun , quickly and completely eliminate them, and this allows the garments to be sold as first class items.

Superkleen S.P.I.F and S.P.I.F. II
They provide quick rates of  evaporation and the  solvent high levels needed for an effective removal of the ink stains. Both products remove the plastisol ink-based cured stains, or aqueous inks from all kind of fabrics. Both are exclusively manufactured with highly refined virgin solvents in order to ensure a crystal clear color. Thus the risk that the  product may leave a "ring" type mark in the clean fabric is eliminated. 

Superkleen® S.P.I.F®
Superkleen S.P.I.F. completely removes, from all kind of fabrics, the spots from plastisol-based cured inks and from most  waterbased inks, the sticked printings and the adhesives. Its exclusive oxygenated formulation leaves no sign of spots in the fabrics. Contrary to ther removals, S.P.I.F® is a great cleaning power product that contains no oil hydrocarbon excipient. This ensures the minimum use of product to remove the marks. 
Superkleen S.P.I.F. does not contain 1,1,1trychloroethane, dichlorofluoroethane nor any ozone suppressive substance. It is exempted from regulation #1171 y 1130.1 SCAQMD (Southern California Air Quality Management District). There is no  flash point before the boiling point. Superlkleen S.P.I.F contains methylene chloride (also known as dichloromethane) and it must be used meeting the OSHA exposure standards (Occupational Safety & Health Administration). The OSHA has set a threshold limit volume (TLV) at 25 ppm and a short term exposure limit (STEL) at 125 ppm for methylene chloryde; both are in force since April 10th, 1997. 

S.P.I.F.R II 
S.P.I.F. II is a new and exclusive cured ink remover that does not contain methylene chloride, nor perchloroethylene nor any other chemical product which carcinogenic properties need to be warned. Contrary to SuperkleenR S.P.I.F and other products methylene chloride based, S.PI.F II has a high threshold limit volume and it is not under  the exposure screening requirements and methylene chloride. The HMIS (Health Management Information System) granted S.P.I.F. II a classification "l" or low related to health problems. S.PI.F. II does not contain ketones (like acetone or methylethylketone) and is not regulated a flammable liquid because its flash point is higher than 141º F (~ 46ºC). 
S.P.I.F. II uses a new technology for hallogenated hydrocarbons combined with isoparaffínic hydrocarbons and glycol ethers to provide the necessary physical conditions  to remove cured ink marks. 
S.P.I.F II does not contain any chemical product from the S.A.R.A. 313 list (Superfund Amendment Recovery Act: a law that authorizes the use of federal funds for the cleaning of great ecological accidents)  nor contains any ozone suppressive substance Class 1 or 2. S.PI.F II is not classified as dangerous material for transportation. (Patent pending). 

Superkleen S.P.I.F and S.P.I.F. II are available in packages of 1 and 5 gallons and in  drums of 55 gallons. 
Superkleen S.P.I.F and S.P.I.F. II have been designed to be used with  ALBATROSS SG-5000 and any other cleaning gun 

PHYSICA

PROPERTIES
SUPERKLEEN S.P.I.F.

SUPERKLEEN S.P.I.F. II

Cleaning / solvent power

Very High 

Very High 

Relative evaporation rate

n-buthyl-acetate=1

>6 (Fast) 

>6 (Fast) 

Approximate Boiling Point 

114º F (~ 46ºC) 

139ºF (~ 59ºC) 

Odor

Low 

Very Low 

Flash Point (T.C.C.)

None 

148ºF (~ 64ºC) 

Carcinogenic properties Warning Requirement

Yes 

No 

H.M.I.S. Classification
Code:4-extreme 3-high 2-mild 1-low

 

 

Health

Inflammability

Reactivity

In transit danger class

1Gallon:Product for consumer 

Not ruled 

 

Big sizes: class 6.1 UN2810,PG111 

Not ruled 

4)EVERBLUM SOLVENTS CLEANING

EVERBLUM is a unique range of solvent mixtures designed to replace the 1,1,1 trichlorethane  in textile, embroidery and apparel manufacturing applications.

EverBlum Solvents for cleaning 
As a new response to replace 1,1,1 trichloroethane,  Albatross has developed some solvent mixtures that offer the best features for textile cleaning. The three recent formulations EverBlum and EverBlum Special replace 1,1,1 trichloroethane . They are all highly effective in eliminating oil, grease and dirtiness from fabrics . However, its physical properties, regulatory states and  costs, vary. The three of them dry quickly, they have nationwide cleaning permissions and are not levying with any special U.S. or Canadian  governmental tax. 

EverBlum Gold
The cleaning fluid EverBlum Gold is a powerful hydrocarbon mixture with  glycol ethers that evaporate. It does not contain 1,1,1 trichloroethane, nor any chloride solvent (methyl chloryde, perchloroethylene, trichlorethylene) nor any hydrochlorofluorcarbon (H.C.F.C.) like dichlorofluorethane. EverBlum Gold only contains ingredients that dry quickly and, hence, evaporates more completely and faster than other mixed products. EverBlum Gold does not contain chemical substances  that may require carcinogenic or ozone layer reduction warnings. Furthermore, EverBlum Gold does not contain chemical substances that may need to be reported according to regulations S.A.R.A. 313. It is a unique solvent mixture that it is not regulated as a dangerous material for transportation. 

New Premium EverBlum (NPE)
New Premium EverBlum is a patented mixture of highly refined solvents. It is very effective to eliminate spots and it does not require fire or cancer warnings. Because NPE contains one part of dichlorfluorethane, it shares many properties that are similar to 1,1,1 trichlorethane, like soft odor, similar to "ether", and a high Threshold Limit Volume (TLV). New Premium EverBlum has no restrictions from E.P.A. if it is aimed to textile cleaning. Those fabrics cleaned with NPE are not regulated to carry an ozone layer reduction label. It has been specially formulated to have 70% less substances reducing the ozone layer than the net trichlorethane 1,1,1 or net dichlorofluorethane ( US Patents  Nº5.419.849 and 5.454.969). 

EverBlum Special
EverBlum Special is a chlorinated solvents mixture (methylene chloride) with narrow cut hydrocarbons. The chlorinated solvents offer a big cleaning power, while the hydrocarbon increase the T.L.V. of the mixture and eliminate the dying loss risk. Ventilation is recommended to keep the steams under the T.L.V. as it is listed in the data sheet of safe materials. The formulation, economical, dries quickly, it does not contain any substance reducing the ozone layer and it does not require either any fire danger labeling. EverBlum Special can remove almost every oil based spots from the fabrics. The ingredients, although potent, do not leave waste in any kind of fabric. 

PHYSICAL PROPERTIES CHART

GOLD 

NPE 

SPECIAL 

1,1,1TRICHLORETHANE 

SOLUBILITY/CLEANING POWER

HIGH

HIGH

HIGH

HIGH

RELATIVE EVAPORATION AVERAGE 
n-buthyl acetate =1
(higer  number  more quickness)

5

3.5

6

6

BOILING POINT (ºF) FIELD

154º--274º

90º--350º

100º--274º 

165º

ODOR

VERY-LOW

LOW

MILD

MILD

FIRE CAUTION NEED

NO

NO

NO

NO

FLASH POINT

NONE

143ºF

NONE

NONE

AVERAGE H.M.I.S. Code : 4-Extreme 3-High 2-Mild 1-Low 0-Insignificant

HEALTH

1

2

2

2

FIRE DANGER

1

1

1

1

REACTIVITY

0

0

0

0

S.A.R.A.313 CHEMICAL LIST

NO

YES

YES

YES

CONTAINING SUBSTANCES CLASS 1 OR CLASS 2 REDUCING OZONE LAYER

NO

CLASS 2

NO

CLASS 1

INTERNATIONAL TRANSPORTATION D.O.T. DANGEROUS CLASS

NOT REGULATED

NOT REGULATED

CLASS 6.1 
UN 2810, PGIII

CLASS:6.1 
UN 2810,PGIII

5)ALBATROSS ESPECIALIZED PRODUCTS FOR CLEANING

Solutions to every spots problems with easy - to - use products.

Albatross Powder Spot Remover
It is a white absorbent powder that literally separates the spot from the fabric, allowing its removal with a brush. It is effective in every kind of fabrics including silk,  taffeta, cotton, wool, polyester and mixed fabrics. The Albatross powder spot remover can be used to eliminate ring marks in fabrics remaining from a liquid cleaner. The powder spot remover does not contain chlorinated solvents.

Albatross Ink-X
It is a spray that dissolves every kind of ink spots from ball point pens, seals, markers, paint and pencils. Ink-X has an exclusive foaming effect that breaks the links between the spots and the fabric. Ink-X does not contain methylene chloryde nor chlorinated solvents. After applying Ink-X, rinse with any liquid solvent cleaner. 

Formula L.R.  Albatross
It eliminates ink spots from ball point pens, inks, lip sticks, tar, heavy oils and grease. It is a highly concentrated product; a small amount can soften even the most persistent spot. Formula L.R. has a semi-paste consistency and it can be applied with brush or cloth. Formula L.R. is a pre-spot removal effective for heavy material spots where it is needed to soften and eliminate dirtiness. 
Rinse with any solvent liquid cleaner. 

Formula B.R. Albatross
It is a highly concentrated formulation that removes effectively the blood spots from every kind of fabric. Formula B.R. it also removes food and perspiration spots. It does not harm the colors nor the fabrics. Formula B.R. is available in a "flip top" package, that allows its application straightly over the spot through a few drops at a time. Rinse with water or steam. 

Albatross Scorch-Out
It removes immediatly the slight marks of scorching and burnings  from the fabrics. Its package with spraying pump allows an easy application. After applying Scorch-Out on the mark simply pass the fabric through a warm drying  or iron at moderate temperature. Scorch Out is especially useful in textile stamping. 

Albatross Coffee Remover
It is a powerful non flammable cleaner that removes spots from coffee, tea, beverages, inks, grass, grease, beer, mustard, liquor and other foods. They do not harm any kind of fabric. The coffee spot remover Albatross is available in a "Flip top" package, that allows the straight application over the spot with a few drops at a time. Rinse with our water or steam. 

Magic Imp Rust Remover 
It is an soft acid formulation that easily removes all the rust and metal spots from fabrics such as: cotton, wool,synthetics, mixtures and carpets. It does not soften nor degrades fabrics. It can be also used to remove rust spots in porcelain, tiles and all kind of materials. It must be rinsed with water or steam.

PRODUCTS

SIZE

ALBATROSS INK-X

13 OZ.

LA FORMULA L.R. DE ALBATROSS

14 OZ.

LA FORMULA L.R. DE ALBATROSS
1 Quart
LA FORMULA B.R. DE ALBATROSS

8 OZ.

ALBATROSS COFFE REMOVER

8 OZ.

MAGIC IMP RUST REMOVER

16 OZ.

ALBATROSS SCORCH-OUT

16 OZ.

ALBATROSS POWDER SPORT REMOVER

16 OZ.

ALBATROSS POWDER SPORT REMOVER

20 OZ.

6)ALBATROSS ADHESIVES FOR PALLETS

The most complete range of  adhesives for pallets. Maximum adhesion without damaging or altering the knitting

Albatross offers adhesives for pallets available in a wide variety of packages and sizes to fulfill the demands of every kind and sizes of screen printers. In Spray or in bulk, solvent or aqueous based, scattering, by contact or roller. Albatross has adhesive for pallets suitable for its application. All Albatross adhesives are formulated to offer a longlasting fixation  and susceptible to pressure. In spray or in bulk, the Albatross adhesives  solvent based manufactured can be applied before the production process, or can be used to accelerate the dry-off time during the production process 

ALBATROSS SPRAY ADHESIVES

DRI WEBTM Is sprayed as a web  getting a very strong fixation.
It is the fastest web type adhesive available in the market and it does not transfer to the fabric. It is perfect for shirts and sweater shirts. Dri Web does not contain chlorofluorocarbon solvents nor chlorinated compounds. It is available in big packages of 20 ozs. 

HOLD TIGHTTM
It sprays as fine mist. This fine mist allows a uniform coverage that helps in getting a perfect register. It is ideal for shirts and cut parts. 

Hold Tight does not contain chlorofluorocarbon solvents nor chlorinated compoundss. Available in big packages of  20 ozs. 

ADHESIVES IN BULK ALBATROSS
AUTO-PALTM it is a non flammable solvents based  manufactured adhesive. Auto-Pal can be sprayed as web or mist. Its quick drying formulation  avoids the transfer to the fabric. Auto-Pal is available in packages of 1 and 5 gallons and drums of 55 gallons. 
SAFETY-PALTM Is  a pallets non flammable aqueous based adhesive. It does not contain any volatile organic compund  (VOC) and it helps improving the safety in the workplace. SAFETY-PAL provides a longlasting  fixation  and susceptible to pressure that can be reactivated applying a  water mist . SAFETY-PAL is available in 16 ozs roller appliers, packages of 1 to 5 gallons, and in drums of 55 gallons 


SPRAYING GUN FOR ADHESIVES ALBATROSS

The electric spraying gun for adhesives ALBATROSS XRT is a light gun that scatters the adhesive without using any propelling gas. Contrary to other alternatives like sprays, XRT does not require neither an adhesive pressure tank nor an air compressor. 
Among its features we highlight a powerful electric pump engine corrosion resistant, a switcher to adapt the flow speed and a tungsten carbon tip adjustable that can scatter either vertically or horizontally. The gun XRT standard has 2 injectors, an additional container with top, 2 valves and a winding electric cord. XRT can be purchased jointly with a reel to hang the gun over the printing press.

7)ALBATROSS SPOT REMOVER FABRIC GUIDE

KIND OF SPOT

PRODUCT/S TO BE USED

PROCEDURE

Adhesives

*

Cleaning chemical EverBlum*, Cleaning fluids S.P.I.F.

*

To clean the following kind of spots: altering marks, ground, grease, oil, wax and printing ink
Altering Marks (Ex. Challk)

*

Cleaning chemical EverBlum, EverBlum Cosmetic Stain Remover
1. Place the dirty garment over the suctioning surface of a cleaning equipment Albatros
Beer

&

EverBium Coffee Remover (Albatross)
2. Pour the cleaning chemical (EverBlum or S.PI.F) inside the bottle of the cleaning  gun 
Blood

&

Albatross Formula B.R.
3. Adapt the cleaning nozzle to the position of precise application. Apply over the dirty area starting by the extremes of the spot towards the center (circular movement)
Floor or car waxes

*

Cleaning chemical EverBIum
4. Once the spot has been removed, change the nozzle to the position of wide mist. Apply the mist around
Chewing Gum

*

Superkleen* Freeze Spray andy Cleaning Chemical EverBlum
the cleaning area so that there remains no defined separation line of the application area.
Coke and other drinks

&

Albatross Coffee Remover
5. Dry the cleaned area immediately using the air drying device of the gun (if available)
Coffee

&

Albatross Coffee Remover
Cosmetic spots

*

EverBlum Cosmetic Stain Remover

&

To clean the following kind of spots: ballpens ink, crayons, 
Crayon

*

Albatross Ink-X Cleaning chemical EverBlum
tinctures,thick grease, lip stick, markers, paint and tar spots
Ground

*

Cleaning Chemical EverBlum Albatross powder spot remover
Apply therecommended pre-spot remover straight over the spot (see spots graphic) friction with a clean cloth or a soft brush. 
Tinctures spots

*

Albatross Formula L.R. and Cleaning chemical EverBlum
Follow steps 1 to 5 as described above
Spots from: eggs , ice cream , milk , fruits, wine , mustard , beverages , foods , oils

&

Albatross formula B.R. EverBlum coffee remover Albatros Powder Sport Remover

*

To clean the following spots: ,beer, blood, coffee, food, grass, liquor, sweat, drinks, rust and tea
Grass (Grama)

&

EverBlum Coffee Remover
Apply the suggested  pre-spot remover straight over the spot (see spot graphic) friction with a clean cloth or a soft brush.Follow steps
Grease and oil

*

Cleaning chemical EverBlum
1 to 5 above described using water in the gun. If you have a steam gun you can also rinse the pre-spot remover with steam
Thick grease

*

Albatross Formula L.R. and Cleaning chemical EverBlum

&

To remove chewing gum: Apply Superkleen Freez Spray.Once the gum is rigid, unstick it from the fabric. Follow steps 1 to 5 using
Ballpens ink , markers, fabric printing ex.: Plastisol 

*

Albatross ink-x and Cleaning chemical EverBlum Cleaning Chemical S.P.I.F
the cleaning chemical EverBlum in the gun to eliminate the waste
Liquors (Alcoholic Drinks) beer, wine, liquors

&

EverBIum Coffee Remover

*

To clean slight scorching marks. Apply Albatross Scorch out over the scorched area. Pass the fabric through the drying tunnel
Lip Stick

*

Albatross Formula L.R.and Cleaning Chemical EverBlum
(if available) or apply heat through a hot air gun (or hair dryer)
Machine oil

*

Cleaning fluids EverBlurn, Albatross Powder Spot Remover
the cleaning procedures above described imply the use of the cleaning electric gun and suction system. It is also possible to clean by hand following 
Paint

*

Albatross ink-x and Cleaning Chemical EverBlum 
this procedure: Determine which product/s Albatross are adquates for the spot. In a good ventilayed area, place a white clean cloth
Sweat

&

Albatross Formula B.R.
straightly below the spot. Apply the pre-spot remover if necessary (see spot graphic). In case of oil based spots
Cosmetic powders

*

Albatross Cosmetic Stain Remover
apply the cleaning chemical EverBIurn with a white clean cloth. For those aqueous based spots, wet a white clean cloth with water. Friction softly on the 
Rust

&

Magic Imp Rust Remover
spot following the knitting. Give a gently finishing touch to  the borders of the fabric to eliminate the limit line 
Slight Scorch Marks

&

Albatross Scorch Remover 
around the cleaned area, repeat the process if necessary
Tar

*

Albatross Formula L.R. and Cleaning Chemical EverBIum
Due to the nature of the different materials, all the cleaning products must be tested in a non-visible part of the fabric
Tea

&

EverBlum Coffee Remover

Due to the nature of the materials, all products must be tested in a non-visible part of the fabric.

* Oil based spots: clean and rinse with cleaning solvent & Aqueous based spots: Clean with suggested pre-spot remover and rinse with water.

What can be done to avoid or eliminate rings?

1. Apply as little as possible cleaning solution just enough to eliminate the spot. When a garment is saturated, is more likely to leave a ring.
2. When a big area is cleaned, eliminate the spot in small sections following the proper procedure.
3. After eliminating the spot, extend the cleaned area applying a cleaning fluid  mist (or water if it is an aqueous based spot). Try to avoid the formation of a separation line between the cleaned area and the rest 
4. After extending the cleaned area, dry it as quick as possible. The cold compressed air (air device in the  gun) is the best way to dry the cleaning solvent. Water must be dried with hot air. While using a hot air gun or a hair dryer, be careful not to burn the fabric
5. If there still remain rings after having followed the steps above mentioned, they can be mostly eliminated applying Albatross Powder Spot Remover. After the fabric has dried, apply Albatross Powder Spot Remover over all the cleaned area. Let the powder dry until it becomes white. Remove the powder with compressed air or a brush
Adress: Riglos 855 - Capital Federal - C1424AQF - ARGENTINA
Phone/Fax: (54-11) 4921-5242 / 4922-3373 / 4923-0305 / 4925-0044 / 4922-5573 / 4924-2948
E-mail: info@vortexarg.com.ar